netGSM - How does it work with HW group devices

The netGSM consists of a client and a server part. The server part is the Poseidon unit with the GSM modem. The clients are other units or software.

Devices currently suporting the netGSM (as of 1.11.2017)

Server (GSM modem needed)

• Poseidon 2250
• Poseidon 4001
• Poseidon 4002
• Poseidon2 4002
• Damocles2 2404
• HWg-SMS-GW/GW2/GW3

Client (no modem needed, SMS are sent through other unit)

• Poseidon 2250
• Poseidon 4001
• Poseidon 4002
• Poseidon 3266
• All products Poseidon2 family
• All products Damocles2 family
• All products IP WatchDog2
• HWg-WLD
• HWg-PWR3/12/25
• HWg-SH4
• HWg-DCD2
• Nagios Plugin (testing)
• PHP Script Example

netGSM supported functions

• SMS Send
• SMS Receive
• Ring a remote phone

Setup parameters descritpion for Poseidon2/Damocles2 in Server mode

Serial Port Settings

Port Function sets the serial port functionality (available only on models with a serial port and netGSM server support). Options:

• Disabled – The serial port is disabled – only with no modem connected and the device working as a client
• GSM modem – the GSM modem is connected and the Poseidon unit works as a server for the netGSM

Remote SMS gateway

Allows to set the IP address, HTTP port and a path to the service. This routes the SMS send requests, RFID control etc. The Poseidon2, Damocles2 and HWg-SMS-GW3 units always use service.xml !

GSM SMS interface

This setups the SMS parameters

• GSM Function – Allows to set if the SMS are sent through a local modem (available only if the serial port is in the GSM modem mode)
• SMS+Ring when Alarm – allows to ring a phone number when sending an SMS
• RS-232 GSM module – GSM modem status
• Not Enabled – not active. This is shown when the RS-232 port settings are changed, but not saved
• Not Found – the Poseidon is set to use the local modem, but that cannot be found
• Waiting for modem – searching for the device
• Initializing – the modem is initializing
• Ready – the device is prepared for use
• SMS center Number – for information, the SMS center number read from the SIM card. If this is not available, SMS cannot be sent

GSM SMS recipient

This allows the user to set the SMS destination numbers. It is independent on the operation mode (local / remote modem)

Setup example1

Two Poseidon units were used:

• 192.168.2.23 Poseidon2 4002 with a GSM modem connected
• 192.168.1.67 Poseidon 3266 with no modem, using the Poseidon 4002 to send SMS

Poseidon2 4002 setup (with the GSM modem)

In the default status you first need to enable the GSM modem in the Serial port Settings and then set the GSM Function to Local. Deactivating the SOAP destination is optional, as well as the SMS+ Ring when Alarm function.

XML setup example

<SerialPort>
<E>1</E>
</SerialPort>
<SMS>
<Function>1</Function>
<Ring>0</Ring>
<Dest>1</Dest>
<Module>Ready</Module>
<CenterNmr>+420608005681</CenterNmr>
<Recp1>777232759</Recp1>
<Recp2 />
<State>13</State>
<Message>OK</Message>
</SMS>
<SOAP>
<Entry>
<Idx>1</Idx>
<E>0</E>
<Server>192.168.1.36</Server>
<Port>80</Port>
<Route>service.xml</Route>
</Entry>
</SOAP>

Poseidon 3266 setup

In the default setting you just need to set the remote IP of the Poseidon and the SMS phone numbers. The SMS+ Ring when Alarm is optional.

XML setup example

<SerialPort>
<E>0</E>
</SerialPort>
<SMS>
<Function>0</Function>
<Ring>0</Ring>
<Dest>1</Dest>
<Module>Ready</Module>
<CenterNmr />
<Recp1>777232759</Recp1>
<Recp2 />
<State>13</State>
<Message>OK</Message>
</SMS>
<SOAP>
<Entry>
<Idx>1</Idx>
<E>1</E>
<Server>192.168.2.23</Server>
<Port>80</Port>
<Route>service.xml</Route>
</Entry>
</SOAP>

Setup example2

Poseidon2 4002 units used HWg-SMS-GW3:

• 192.168.100.169 HWg-SMS-GW3
• 192.168.100.223 Poseidon2 4002 without modem, using the HWg-SMS-GW3 to send SMS

HWg-SMS-GW3 setup

HWg-SMS-GW3 used security with username and password for netGSM (SOAP)

XML setup example

<Network>
<dhcp>1</dhcp>
<hostname>HWg-SMS-GW3</hostname>
<ip_address>192.168.100.169</ip_address>
<ip_mask>255.255.255.0</ip_mask>
<ip_gateway>192.168.100.1</ip_gateway>
<dns1>192.168.100.237</dns1>
<dns2>192.168.100.250</dns2>
<porthttp>80</porthttp>
<username/>
<password/>
<soap_username>1 1sX6k4D26A==</soap_username>
<soap_password>1 zd/uhpg=</soap_password>
</Network>

Poseidon2 4002 setup

In the default setting you just need to set the remote IP of the HWg-SMS-GW3 and the SMS phone numbers. The SMS+ Ring when Alarm is optional.

XML setup example

<SMS>
<Function>0</Function>
<Ring>1</Ring>
<Dest>1</Dest>
<Module>Not enabled</Module>
<CenterNmr/><Recp1>+420777232759</Recp1>
<Recp2/>
<Recp3/>
<Recp4/>
<Recp5/>
<State>0</State>
<Message/>
</SMS>
<SOAP>
<Entry>
<Idx>1</Idx>
<E>1</E>
<Server>192.168.100.169 </Server><Port>80</Port>
<Route>service.xml</Route>
<Name>testik</Name>
<Pswd>hwg</Pswd>
</Entry>
</SOAP>