HWg-SMS-GW3

• Add watchodog site registration
• Add syslog for ringout

• Fix: decoding non-Ascii characters

• Mod: -relocated reading of incoming SMS to AT + CMGR command, which reads messages one by one.
• Mod: switch on data flow control in the modem
• Mod: increase the serial buffer at the port to the modem and do not set the limit for data flow control.

Mod: Add Agent XML section to values.xml file

• Fix: Enable / disable SIM PIN in LTE versions
• Fix: Delete received messages on some networks

Fix: message PDU format for long SMS

• Fix:  long sms messages composed of multiple parts that have refnum=0

• Mod: Dividing the parameter into groups according to the displayed pages, so that each xml page has only what is needed and not everything
• Add: the ability to change the PIM on the SIM card

• Common firmware for HWg-SMS-GW3 and SMS-GW3 LTE

Fix: Return code after deleted incoming message over netGSM protocol

FIX Sending SMS longer than16 Characters over SNMP

• MOD: Complete overhaul of work with special characters. HWg-SMS-GW3 now fully supported UTF8, Unicode, ASCII and GSM 03.38 charsets. Nessages are sent in 7.bits od 8.bits as required.
• Fix: MASK 255.255.255.255

• NEW: Support long SMS and SMS in UTF-8
• NEW: Support HTTP GET (must be enabled in GSM modem tab) as:
  • http://your_GW3_IP/values.xml?Cmd=Call&Nmr=00XXXXXXXXX
  • http://your_GW3_IP/values.xml?Cmd=SMS&Nmr=00XXXXXXXXX&Text=Hello World

Fix: Username and password leihgt

FIX: Incoming MMS causes the device to be restarted

Fix: Clear counters on GSM modem page

• Ad: Support of long SMS messages added
• Ad: Added support of reading recieved SMS messages via WWW and XML

• Add: mobile operator can be manually selected
• Add: roaming in a mobile network disabled

• Fix: SNMP by RFC1212
• Add: SNMP MIB file in System page
• Add: SNMP OID for device status, GSM network and information about SMS queue.  All Read only
• Add: SNMP OID for sending SMS messages via SNMP :
  • msgQueueText (OID .1.3.6.1.4.1.21796.4.10.2.1.0) - (mandatory) Text of the SMS
  • msgQueueNmr (OID .1.3.6.1.4.1.21796.4.10.2.2.0) - (mandatory) Phone number where the message will be sent
  • msgQueueCmd (OID .1.3.6.1.4.1.21796.4.10.2.3.0) - (mandatory) The command determines what action should be performed with the message: 1=sms,2=ring,3=sms+ring

Add: IMEI on system page

• FIX: AT&T support
• Add: SYSLOG - only for HW group debug
• FIX: Saving of the items in the Time menu fixed

Fix: javaScript Error

• FIX: RingOut function
• FIX: LED operation
• Fix: Error handling with empty messages and special characters
• ADD: Link for update from WWW

Fix: many bugs

First Public Release