Icons and colors in SensDesk

From our blog

HWg wins TruePath Cool Tools Award 2017

03/09/2017 - 08:22

HWg wins TruePath Cool Tools Award 2017

SNMPv3 support is here!

05/19/2015 - 19:25

The SNMP v3 is now supported in all the Poseidon2 units. This is a major update that brings many advantages and improvements. The following text will explain...

In SensDesk, each sensor and device state has its specific color and icon. This scheme is consistent throughout the portal.

Horizontal menu

Support

Icons indicating the states of sensors and digital inputs/outputs

State	Color	Icon	Description
OK	Green		Indicates an OK sensor – the sensor is sending a valid value that is within the safe range.
Alarm	Red		Indicates a sensor in the Alarm state – the measured value is outside of the allowed safe range.
Unknown	Orange		Indicates a sensor with an Unknown state – the sensor is connected but SensDesk does not yet have its configuration information.
Invalid	Orange		Indicates a sensor in the Invalid state – the sensor is disconnected or otherwise damaged, and Sensdesk does not have valid information about its value, even though its device is communicating normally.
Disabled	Gray		Indicates a Disabled sensor – the sensor is turned off for processing in Sensdesk configuration. The device works with it normally.

Icons indicating device status

State	Color	Icon	Description
OK	Green		Indicates that the device is OK – it is functioning normally and sending data.
Alarm	Red		Indicates a device in the Alarm state – some of its sensors are in Alarm, the measured value is outside of the allowed safe range.
Unknown	Orange		Indicates that the device state is Unknown – the device is already registered in SensDesk but its configuration and connected sensors are not yet known.
Invalid	Orange		Indicates a device in the Invalid state – the device has not reported for more than 2 Push periods.
Disabled	Gray		Indicates a Disabled device – the device has the Push function disabled but otherwise works normally.