Check out the examples below:
1234 is the default password. Input caption text here.
You have to use it if your number is not listed as one of the 5 SMS recipients.
In case you are not using the default password, it must be only a single-word password (cannot contain any spaces).
• Status or Status SMS – sends a text message with the current status.
• Status Email – sends an e-mail with the current status.
• Reset or Reboot – restarts the Ares unit.
• Debug – returns debugging information.
• Upgrade – without further parameters, upgrades the firmware using
the configured address. Full URL can be included in the message.
• Push – sends test PUSH to the address set in AresConf.
The returned value contains the sent information.
• Push http://address – sends test PUSH to the address set in the SMS.
The returned value contains the sent information.
Configuration SMS
• GETCFG variable – obtains the information about the value of a variable.
• SETCFG variable – sets the variable to a requested value.
Use
SETCFG variable = value
SETCFG variable = value; variable1 = value1;… (max. 160 chars)
GETCFG variable SETCFG variable; variable1;… (max. 160 chars)
Names of variables are the same as the names in setup.xml within the section.
For a real example of how to set up SensDesk in Ares configurations with SMS commands, read this application note.
Preview of this Newsletter you find here.