Poseidon 3266
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.9 | 3.1.9 | 02/12/2014 - 11:13 | 334.22 KB |
Fix: ethernet driver
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.8 | 3.1.8 | 05/13/2013 - 09:45 | 332.38 KB |
Fix: Calibration
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.7 | 3.1.7 | 09/29/2011 - 09:06 | 333.44 KB |
with netGSM support
ADD: 4 e-mail destinations – addresses separated by comma (2 TO addresses, 2 CC addresses)
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.7 | 3.1.7 | 09/29/2011 - 09:05 | 333.44 KB |
ADD: 4 e-mail destinations – addresses separated by comma (2 TO addresses, 2 CC addresses)
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.5 | 3.1.5 | 01/10/2011 - 13:27 | 333.76 KB |
Fix: new FLASH
Change: up to 5 1-Wire sensors support
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.4 | 3.1.4 | 09/22/2010 - 10:21 | 333.46 KB |
Add: Remote GSM modem support
Add: new FLASH
Del: DHCP support
Fix: Modbus/TCP connection after power off
Add: new FLASH
Del: DHCP support
Fix: Modbus/TCP connection after power off
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.2 | 3.1.2 | 04/12/2010 - 08:28 | 328.71 KB |
FIX: new FLASH
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.1 | 3.1.1 | 03/08/2010 - 09:34 | 328.53 KB |
FIX: E-mail format
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.1.0 | 3.1.0 | 01/04/2010 - 08:20 | 376.99 KB |
- Development finish. Or revision without back compatibility
- 4x Trap destination
- alarm trap at sensor the same as at binar inputs
- sensorChanged is not generated from the change of status, but from alarm automat
- rename of TRAPU in MIBce so it´s clear, that alarm status was changed, not status of sensor
- The result is, that „trap s out of range“ will not be sent - periodic email – continuous sending of status email (if alarm not occure) or Reminder Alarm (if alarm occures)
- values.xml file is a part of all e-mails (alarm/testing/periodical)
- change of e-mail format - status of output added
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.0.6 | 3.0.6 | 11/03/2008 - 13:47 | 328.5 KB |
FIX: doopraven reset a zapis na 1-wire
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.0.5 | 3.0.5 | 11/03/2008 - 13:46 | 332.63 KB |
FIX: opraven bug ve cteni 1-wiru
MOD: upraven kod pro cteni 1-wiru
FIX: opraveno generovani sekund v setup.xml (byl maly buffer)
MOD: upraven format emailu
MOD: makro AlarmActive nahrazeno funkci
MOD: promazany, setrideny a upraveny retezce v resources.h
ADD: pridano zpracovani metody POST pro dalsi soubory (akce z tabulky httpstru.h)
ADD: pridana a upravena puvodni podminka pro zobrazeni odkazu ve values.xsl
ADD: do setup.xml pridany prazdne tagy s parametry daneho modelu dle modeldef
FIX: upraven nazev mib tabulky pro modely s spi logem (pos_log.mib), nazev byl priliz dlouhy
MOD: zmeny nazvu pointeru do programove pameti (z x_Pp na p_x_P)
MOD: uprava pro posilani prazdnych tagu (posila se pouze druha cast)
MOD: upraveny komentare funkci pro overeni http authorizace
MOD: v modeldefu doplneny vsechny definice, ale jsou zakomentovane
ADD: do trapu pridano sysName
FIX: nova flash (3.0.1)
FIX: oprava authorizace pro pristup do telnet setupu
ADD: pridano favicon.ico
FIX: opravy komentaru
MOD: pro flash.swf pridano content-type: application/x-shockwave-flash
MOD: upravena authorizace na web
- pokud neni pro dany pristup heslo potrebne, nevyskoci jiz authorizacni tabulka
- pokud chci nasledne provest akci, ke ktere je treba vyssi uroven, pak se zobrazi moznost k authorizaci
- usetreni kodu v ProcessRequest() a auth.c
- pridan sloupec do tabulky v httpstru.h
MOD: upraveny funkce pro detekovani senzoru a nastavovani adresy senzoru s pouzitim noveho commlow
FIX: osetreni kodu pri hysterezi = 0 a hysterezi = 0.1
FIX: opravicka v parsovani tudiz vyhodnocovani hodnot vystupu
MOD: upraven kod pro cteni 1-wiru
FIX: opraveno generovani sekund v setup.xml (byl maly buffer)
MOD: upraven format emailu
MOD: makro AlarmActive nahrazeno funkci
MOD: promazany, setrideny a upraveny retezce v resources.h
ADD: pridano zpracovani metody POST pro dalsi soubory (akce z tabulky httpstru.h)
ADD: pridana a upravena puvodni podminka pro zobrazeni odkazu ve values.xsl
ADD: do setup.xml pridany prazdne tagy s parametry daneho modelu dle modeldef
FIX: upraven nazev mib tabulky pro modely s spi logem (pos_log.mib), nazev byl priliz dlouhy
MOD: zmeny nazvu pointeru do programove pameti (z x_Pp na p_x_P)
MOD: uprava pro posilani prazdnych tagu (posila se pouze druha cast)
MOD: upraveny komentare funkci pro overeni http authorizace
MOD: v modeldefu doplneny vsechny definice, ale jsou zakomentovane
ADD: do trapu pridano sysName
FIX: nova flash (3.0.1)
FIX: oprava authorizace pro pristup do telnet setupu
ADD: pridano favicon.ico
FIX: opravy komentaru
MOD: pro flash.swf pridano content-type: application/x-shockwave-flash
MOD: upravena authorizace na web
- pokud neni pro dany pristup heslo potrebne, nevyskoci jiz authorizacni tabulka
- pokud chci nasledne provest akci, ke ktere je treba vyssi uroven, pak se zobrazi moznost k authorizaci
- usetreni kodu v ProcessRequest() a auth.c
- pridan sloupec do tabulky v httpstru.h
MOD: upraveny funkce pro detekovani senzoru a nastavovani adresy senzoru s pouzitim noveho commlow
FIX: osetreni kodu pri hysterezi = 0 a hysterezi = 0.1
FIX: opravicka v parsovani tudiz vyhodnocovani hodnot vystupu
| Version | Release date | File size | Download | |
|---|---|---|---|---|
Poseidon 3266 3.0.4 | 3.0.4 | 11/03/2008 - 13:45 | 331.59 KB |
FIX: Flash 2.9.1