WLD sensing cable A - 2m

2m of WLD sensing cable type A. Liquid is detected along the entire length of the WLD sensing cable.
WLD (Sensing cable) water detection is more expensive than spot water detection. Water detection along entire length of WLD sensing cable provides much faster reaction to any water in the room.

WLD sensing cable features

  • Liquid is detected along the entire length of the WLD sensing cable.
  • WLD sensing cable Type A detects even the smallest volume of water, ethylene glycol, or other conductive liquid.
  • WLD sensing cable is re-usable (flooded cable can be cleaned, dried & used again)
  • Zone detection states:
    • 0 = OK
    • 1 = Flooded
    • 2 = WLD cable disconnected

 

Cost effective installation

  • WLD sensing cable installation can be realized even after other electrical cables are installed already.
  • No special training required for WLD sensing cable installation.
  • Combine sensing & non-sensing (prolong) cables according to the possible presence of water.
     
  • No Bend limit: WLD sensing cable Type A is not limited by any bending radius. Sensing cable can be knotted and still works properly.
  • No Twist limit: WLD sensing cable Type A can be twisted as any other electrical cable. 
  • No Grip limit: Water detection functionality is not limited by point pressure within a reasonable range.
  • WLD zone total lenght limit (60 / 185m) is defined by used device with WLD zone input..

 

Long-term stable detection

  • Once installed, WLD sensing cable do not generate false alarms.
  • Micro movements caused by the movement of the surrounding cables do not cause false alarms.
  • Fast reaction - even a few drops of the water will be detected.
  • Mecanically disconnected WLD sensing cable will be indicated.
Features: 
  • Water (or ethylene glycol) is detected along the entire length of the WLD sensing cable.
  • Early waring - even a few drops of liquid is detected
  • Long-term stable water leak detection system (no fake / false alarms)
  • Whole WLD sensing cable is one water detection zone.
  • WLD sensing cable can be easily combined with non-sensing prolong cable up to max total lenght.
  • WLD can be very cost effective solution by mixing sensing and non-sensing segments of the cable.
  • WLD sensing cable is re-usable (flooded cable can be cleaned, dried & used again)
  • No Bend / Twist / Grip limit is significant for easy (low-cost) installation in combination with long-term reliability
Applications and usage: 
  • Water detection in any environment
    • Datacenters
    • Storage room
    • Technology locations
    • Woden constructions
       
  • Can be taped on the floor, wrapped around pipes or attached to a wall.

Horizontal menu

WLD system components

  • WLD A connection cable 2m (Terminator included)
  • Water sensing cable WLD - 2m
  • Water sensing cable WLD - 10m
  • Water sensing cable WLD - 50m
  • WLD A prolong cable 5m
     
  • WLD2 (LAN & WiFi device, 4 WLD zones, Standalone Monitoring )
  • NB-WLD (NB-IoT device, 1 WLD zone, IoT Monitoring )
  • SD-WLD (LAN & WiFi device, 1 WLD zone, IoT Monitoring )
  • Sensor WLD Relay 1W-UNI (1W-UNI - RJ11 / Relay output, 1 WLD zone)

Recommended products

WLD A prolong cable 5m

Prolong non-sensitive cable 5m for WLD type A. Can be extended to up to 100m in total.

Sensor WLD Relay 1W-UNI

A universal WLD (Water Leak Detection) sensor, with one WLD sensing cable input and 2 kind of outputs (1W-UNI sensor and relay output).

WLD2

WLD2 is a WiFi / Ethernet water leak detector with support for WWW, SNMP and PoE. To detect leaking liquids, it uses 4 sensing cables

SD-WLD

SD-WLD is a water leak detector with Ethernet and WiFi that detects the presence of water using a sensing cable.

NB-WLD

NB-WLD is a water leak detector with Narrowband IoT connectivity. It uses a very sensitive detection cable.