The HW group product portfolio includes three major domains: Environmental, system and process monitoring devices; technology for IP based serial interface system control and data logging and Access Systems.
Power
-
12V/1.5A Wall plug adaptor INT
12V / 1.5A power adaptor, International version with three replaceable plugs (EUR, UK, US).
-
12V power adaptor 3pin ATX
12V / 2.5A power adaptor, with IEC-320 C14 power plug input.
-
12V Wall plug adaptor - INT
12V / 0.5A power adaptor, International version with three replaceable plugs (EUR, UK, US).
-
5V Wall plug adaptor INT
5V / 1.2A power adapter, International version with integrated short and overload protection.
-
UPS 12V
The "UPS 12V" is a backup power source for devices with 12V DC power supply
-
UPS 12V and 5V
The "UPS 12V and 5V" is a backup power source for devices with 12V as well as 5V DC power supply which can be powered by the UPS simultaneously.
Converter
-
SMS-GW3
HWg-SMS-GW3 is a central text message (SMS) gateway that HWg devices and applications in the same network can use to dial numbers or send SMS alerts.
-
SMS-GW3 LTE
SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.
HUB/Expander
-
Poseidon S-Hub
S-Hub allows connection of RS-485 sensors to Poseidon family units
-
Poseidon T-Box RJ11
T-Box hub connects sensors over 1-Wire bus to Poseidon2 a nd Ares10/12 family units
-
Poseidon T-Box2
Splitter for 2x RJ11 sensors.
-
Spider
Connects 4 dry contacts or 1-Wire bus RJ11 sensors to Poseidon2 4002 via RS-485 (RJ45) bus
Mounting Wall
-
2x L profile A size
Wall mounting profiles for metal-cased HWg devices Poseidon2 4002 and Poseidon 2250.
-
3M Dual Lock fastener
Self-adhesive hook and loop fastener 3M Dual Lock
-
DIN Rail box set
A mounting kit for installing HWg devices to a DIN rail.
-
Mount plate D
Mount support for HWg-Ares and Poseidon2
-
Mount plate E- 1U
Rack (cabinet) mount plate, 1U montage for HWg-Ares and Poseidon2 devices
-
Mount plate L DIN Rail
Mount support for HWg-Ares and Poseidon2
-
Mounting set
Screw set for mechanical mounting
-
Rack mounting brackets 19
Mounting kit for Poseidon2 4002 and HWg-SMS-GW3
-
Rack Shelf 1U
Rack Shelf 1U is a versatile solution for mounting HW group devices to 1U shelves easily.
Cable
-
DB9 LapLink cable 2m
A LapLink cable allows to connect two computers .
-
DB9 Prolong cable 2m
Extending communication RS-232 cable, 2m long.
-
Power jack cable 1m
1 meter long cable - power jack to 2 wires converter.
-
Sensor RJ45 LAST cable
RS-485 cable 0.5m, RJ45/4 pins to connect 4 terminal pins (A, B, +, - ) to connector RJ45 (2 pairs)
-
Sensor RJ45 MIDDLE cable
Connection RS-485 cable 0.5m. RJ45/4 pins to terminal block (A, B, +, - ). (3 pairs)
-
USB Cable mini 2m
USB Cable mini 2m USB cable for connecting of Ares unit to PC
-
WLD connection cable A
Connection cable for connecting WLD device with WLD sensing cable.
-
WLD prolong cable A
Prolong non-sensitive cable 5m for WLD type A. Can be extended to up to 100m in total.
Others
-
1W-UNI USB calibrator
1-Wire UNI sensors enables setting and calibration of the measured values
-
2-pin Terminal Block
2-pin Terminal Block
-
3-pin Terminal Block
3-pin Terminal Block
-
Connector RJ-45F DN93612
Connector RJ-45F
-
DIN Relay 1s
DIN Relay 1s
-
DIN Relay 2s
DIN Relay 2s
-
E-lock BeFo 512
E-lock BeFo 512 is an electromagnetic lock suitable for the connection to our RFID constructions or coded locks.
-
E-lock XPO-211
Electromagnetic lock E-lock XPO-211 is designed for installation into rack door systems.
-
GSM SMA antena quadband
GSM antenna quadband with SMA connector for Ares devices
-
HWg-SH1: H3-EM Electronic Locking Swinghandle
Southco electronic swing-handle for rack/cabinet access systems.
-
I/O Controller 2 Test board
A test board for easy setup and debugging of your applications for the I/O Controller.
-
I/O Controller 20 pin connector
Two 10 pin green connectors for connecting peripherals to a standard I/O Controller2.
-
RFID card M1
RFID Card type M1. White card with HWg logo & printed order code.
-
RFID reader R3
RFID reader in standard EM4100 (125kHz) with keyboard and interface of Wiegand.
-
RFID Reader R3 - RJ45
RFID reader in standard EM4100 (125kHz) with keyboard and interface of Wiegand.
-
RFID tag
This RFID tag is EM4102 chip with unique code of 64bits.
-
Sensor calibration
Calibration protocol from accredited laboratory for one physical value in 3 calibration points. (In case you don´t specify the calibration points, laboratory uses the these standard points for temperature and for humidity.