PadPuls M1

The 1-channel pulse adaptor PadPuls M1 allows the use of meters with pulse output as M -Bus slaves. So for example, data from a simple water or electricity meter can central be read out by M-Bus.
Accessories producer: 
Relay GmbH
Product page: 
PadPuls M1 Slave
Tested withFirmwareResult
HWg-PWR3/12/25
1.0.10 and later
OK
    • Supplied by M-Bus, or integrated battery at an M-Bus failure, needs no power supply unit.
    • Full functional even if operated with battery.
    • Maximum pulse frequency 20Hz
    • Debouncing of pulses
    • Adjustable pulse values and pulse unit
    • M-Bus protocol according to EN1434-3
    • Fully parameterizable by M-Bus, including overwrite protection
    • Wall mounted
    • Also delivered as board without housing for OEM service
    • Protective class IP 54