Detectors 
Detectors indicates 0/1 as the output value (Doors = open/close for example). Detectors are typically connected to DI input of HW group devices.
Water detection 
Flood Detector LD-12
Spot flood detection
Sensor WLD Relay 1W-UNI
Up to 85 meters of water detection cable (connection DI or 1Wire UNI)
Flood detector 1W-UNI 3m
1D water detection can be fully submerged (connection 1Wire UNI)
Power 110/230V detection
PoweEgg2
110/ 230 V single phase, max. load 8A
Power Detector
110/230 V voltage, relay output (max. 50V/ 13V)
Door contact
Door contact MK4
Designed for door opening detection.
Sensors
You can connect to the RJ11 port (1-Wire) on all HW group monitoring devices. The sensors provide a continuous value.
Temperature range: 0 to 50°C (IP67), Humidity range: 0 to 95% RH, CO2 range: 300 to 40000 ppm
Temperature
Temp-1Wire-Flat 3m
Temperature range: -30 to 60°C (IP67)
Sensor with flat cable is designed for monitoring freezers and fridges.
Temperature range: -50 to 200°C (IP67)
Temperature range: -200 °C to 160 °C (IP67)
Temperature range: -30 to 70 °C
Relative Humidity 
Humidity range: 0-100 % RH, Accuracy: 5% RH
Temperature, Relative Humidity
Temperature range: -10 to 80°C, Humidity range: 0-100% RH
Temperature range: -30 to +70 °C
Humidity range: 0 to 100% RH
Temperature range: -10 to 80°C
Humidity range: 0-100% RH
Temperature range: -30 to 80°C
Humidity range: 0–100% RH
Temperature range: -30 to 85°C
Humidity range: 0–100% RH
Light intensity 
Illuminance: 0–100%
Accuracy: +-10%
AC / DC Voltage 
8-point calibration table
Accuracy: +-2%
Voltage range: 0–250 V AC
Accuracy: 5%