Product run-out
New product Available
Temperature probe on a cable with a RS-485 converter in a wall-mount box.
The probe (included) is on a 2m cable in a stainless-steel rod.
The sensor can be used separately or connected to a Poseidon2 4002 unit.
Features:
- Environment: Indoor or outdoor use – IP65, wall mount
- Supplied probe: External Pt100 temperature probe (stainless steel housing, 2m cable)
- External probe measured temperature range: –50°C to +200°C (–58°F to +390°F)
- Operating temperature: The converter works from –30 to +70°C (–22 to +160°F)
- Interface: RS-485, terminals
- Compatible with: Poseidon2 4002
- Power supply: From the Poseidon (12V), or 10..35VDC
Applications and usage:
Typical applications include measuring temperature in places that can be flooded with water, or an environment with moisture condensation.
The temperature probe is separated from the converter to enable a wider range of measured temperatures and easier installation in certain applications.
- Measuring element on the cable: Pt100/A, IP67 protection
- Cable 2m, shielded silicone
- Rod length: 50 mm
- Probe connection: 4-wire
- Enclosure material: 17240 stainless steel
- Converter ext. dimensions: 62 x 95 x 35 mm
- Converter protection: IP65 (EN 60 529)
- Supply voltage: 10 to 35 VDC (protected against polarity reversal)
- Consumption while measuring: typ. 2 mA
- Consumption during RS-485 transmission: typ. 60 mA
- Wire connection: CUU 2.5 mm2 terminals
RS-485 bus
- Communication: ASCII (9600Bd 8N1)
- Address configuration:software configuration or jumpers
- Termination: can be enabled with a DIP switch
