Primary tabs
The sensors you connect to the RJ11 port (1-Wire) or RJ45 port (RS-485) on the HW group monitoring device. The sensors provide a continuous value of, for example, -23.4 ° C or 32.7% RH. Device monitoring (SensDesk) can monitor the safe range of values and send an email or SMS alert when changing outside the value range. You can use sensors from the HW group only.
1-Wire
-
HTemp HomeBox
Combined temperature sensor -30 ° C to +70 ° C and humidity sensor 0-100% RH, for wall mounting RJ11 (1-Wire)
-
HTemp-1-Wire Outdoor
Temperature and humidity sensor for outdoor use.
-
HTemp-1Wire 3m
Digital temperature and humidity sensor for indoor and outdoor use.
-
HTemp-1Wire Rack 19
Combined temperature and humidity probe for IT environment.
-
HTemp-1Wire-Box2
Wall mount temperature and humidity sensor.
-
Humid-1Wire (1m, 3m, 10m)
Humidity probe (0 - 100% RH) designed for IT environment.
-
Temp HomeBox
Temperature sensor -30 ° C to +70 ° C for wall mounting RJ11 (1-Wire)
-
Temp-1Wire 3m calibrated - On request
Temperature sensor (-10°C to +80°C)
-
Temp-1Wire IP67 (1m, 3m, 10m)
Temperature sensor with IP67 protection for general use.
-
Temp-1Wire Pt100
High precision temperature sensor -50 °C to +200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, agriculture and industrial applications.
-
Temp-1Wire Pt100 Frost
Precise industrial temperature sensor -200 to +160 °C
-
Temp-1Wire Rack 19
Temperature sensor designed for the IT environment.
-
Temp-1Wire-Flat 3m
A stainless steel temperature probe with a flat cable.
-
Temp-1Wire-Outdoor 3m
Outdoor temperature sensor with IP67 protection
1-Wire UNI
-
100A DC Current probe 1W-UNI
Sensor for direct measuring of DC current of up to 100A
-
30A AC Current probe 1W-UNI 2
30A Current probe 1W-UNI 2
-
30A DC Current probe 1W-UNI
Sensor for direct measuring of DC current of up to 30A
-
Light 1Wire-UNI
Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices via 1-Wire UNI bus (RJ11).
-
Sensor 0-20mA 1W-UNI
Converter with isolated 0-20 mA AI (Analog Input) for external source probes and RJ11 output (1W-UNI).
-
Sensor 230V AC 1W-UNI
The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.
-
Sensor 4-20mA 1W-UNI
Converter with isolated 4-20 mA AI (Analog Input) for external current sink probes and RJ11 output (1W-UNI).
-
Sensor 60V 1W-UNI v2
Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.
-
Sensor CO2 1W-UNI
Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)
-
Sensor THPVoc 1W-UNI
Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) interface.
-
Temp-1W-UNI Pt100 Cable
Temp-1W-UNI Pt100 Cable
-
Temp-1W-UNI Pt100 Frost
Pt-100 based low temperatures sensor with 1-Wire UNI output.
Modbus/RTU (RS-485)
-
Htemp CO2 485-RTU RK-CHM-D
CO2 concentration, temperature and humidity interior sensor with RS485 interface
-
Htemp-485 Modbus RTU T3411
Temperature and humidity sensor Htemp-485 Modbus RTU T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Perseus units.
-
Htemp-485 Modbus RTU T3419
Temperature and humidity sensor Htemp-485 Modbus RTU T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be therefore used alone or with Poseidon units.
-
PHTemp-485 Modbus RTU T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be used alone, or with Poseidon units.
RS-485 HWg
-
HTemp-485 Box2
Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.
-
HTemp-485 T3411
Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
HTemp-485 T3419
Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
PHTemp-485 T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.
-
Temp-485 Box2
Temperature sensor for indoor usage at RS-485 bus with a simple communication protocol. The sensor can be used separately but is designed for connection to the Poseidon measuring unit and transmit temperature over SNMP, WEB
-
Temp-485-Pt100 Box2
Temp-485-Pt100 Box2
-
Temp-485-Pt100 Cable3
Temp-485-Pt100 Cable3
-
Temp-485-Pt100 Frost2
Temp-485-Pt100 Frost2
WLD
-
WLD sensing cable A
WLD sensing cable type A. Water is detected along the entire length of the WLD sensing cable.
PT100/1000 Probe
-
probe Pt100 TG8
probe Pt100 TG8
-
Probe Pt100 TR125 2m
Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.