Primary tabs
The HW group product portfolio includes three major domains: Environmental, system and process monitoring devices; technology for IP based serial interface system control and data logging and Access Systems.
Sensor
-
100A DC Current probe 1W-UNI
Sensor for direct measuring of DC current of up to 100A
-
30A AC Current probe 1W-UNI 2
30A Current probe 1W-UNI 2
-
30A DC Current probe 1W-UNI
Sensor for direct measuring of DC current of up to 30A
-
HTemp HomeBox
Combined temperature sensor -30 ° C to +70 ° C and humidity sensor 0-100% RH, for wall mounting RJ11 (1-Wire)
-
HTemp-1-Wire Outdoor
Temperature and humidity sensor for outdoor use.
-
HTemp-1Wire 3m
Digital temperature and humidity sensor for indoor and outdoor use.
-
HTemp-1Wire Rack 19
Combined temperature and humidity probe for IT environment.
-
HTemp-1Wire-Box2
Wall mount temperature and humidity sensor.
-
HTemp-485 Box2
Combined temperature and humidity sensor for vertical wall mounting indoor usage. Communication over RS-485 bus with a simple communication protocol. The sensor can be used separately but it was designed to be connected with thePoseidon family units.
-
Htemp-485 Modbus RTU T3411
Temperature and humidity sensor Htemp-485 Modbus RTU T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Perseus units.
-
Htemp-485 Modbus RTU T3419
Temperature and humidity sensor Htemp-485 Modbus RTU T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be therefore used alone or with Poseidon units.
-
HTemp-485 T3411
Temperature and humidity sensor HTemp-485 T3411. IP40 allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
HTemp-485 T3419
Temperature and humidity sensor HTemp-485 T3419. IP40 shielding allows outdoor usage. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be therefore used alone or with Poseidon units.
-
Humid-1Wire (1m, 3m, 10m)
Humidity probe (0 - 100% RH) designed for IT environment.
-
Light 1Wire-UNI
Simple light intensity sensor for indoor use. The sensor is designed for use with Poseidon and Ares devices via 1-Wire UNI bus (RJ11).
-
PHTemp-485 Modbus RTU T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over Modbus RTU. The sensors can be used alone, or with Poseidon units.
-
PHTemp-485 T7410
Temperature, humidity, barometric pressure and dew point temperature sensors. For indoor use. Measured values are shown on a display and transmitted to the system over RS-485. The sensors can be used alone, or with Poseidon units.
-
probe Pt100 TG8
probe Pt100 TG8
-
Probe Pt100 TR125 2m
Temperature probe Pt100/B for low temperatures. Temperature range -190 to +150°C. PTFE covered cable 2m, 4-wires, IP67 probe in in stainless steel tube 50mm.
-
Sensor 0-20mA 1W-UNI
Converter with isolated 0-20 mA AI (Analog Input) for external source probes and RJ11 output (1W-UNI).
-
Sensor 230V AC 1W-UNI
The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.
-
Sensor 4-20mA 1W-UNI
Converter with isolated 4-20 mA AI (Analog Input) for external current sink probes and RJ11 output (1W-UNI).
-
Sensor 60V 1W-UNI v2
Electrically isolated voltage sensor for up to 60VDC with 1Wire-UNI output.
-
Sensor CO2 1W-UNI
Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)
-
Sensor THPVoc 1W-UNI
Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) interface.
-
Temp HomeBox
Temperature sensor -30 ° C to +70 ° C for wall mounting RJ11 (1-Wire)
-
Temp-1W-UNI Pt100 Cable
Temp-1W-UNI Pt100 Cable
-
Temp-1W-UNI Pt100 Frost
Pt-100 based low temperatures sensor with 1-Wire UNI output.
-
Temp-1Wire 3m calibrated - On request
Temperature sensor (-10°C to +80°C)
-
Temp-1Wire IP67 (1m, 3m, 10m)
Temperature sensor with IP67 protection for general use.
-
Temp-1Wire Pt100
High precision temperature sensor -50 °C to +200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments, agriculture and industrial applications.
-
Temp-1Wire Pt100 Frost
Precise industrial temperature sensor -200 to +160 °C
-
Temp-1Wire Rack 19
Temperature sensor designed for the IT environment.
-
Temp-1Wire-Flat 3m
A stainless steel temperature probe with a flat cable.
-
Temp-1Wire-Outdoor 3m
Outdoor temperature sensor with IP67 protection
-
Temp-485 Box2
Temperature sensor for indoor usage at RS-485 bus with a simple communication protocol. The sensor can be used separately but is designed for connection to the Poseidon measuring unit and transmit temperature over SNMP, WEB
-
Temp-485-Pt100 Box2
Temp-485-Pt100 Box2
-
Temp-485-Pt100 Cable3
Temp-485-Pt100 Cable3
-
Temp-485-Pt100 Frost2
Temp-485-Pt100 Frost2
-
WLD sensing cable A
WLD sensing cable type A. Water is detected along the entire length of the WLD sensing cable.
Detectors
-
AirFlow sensor 5101
AirFlow sensor 5101, sensor switches relay, when air-flow step up over setting level.
-
Door contact MK4
Security Door contact MK4 with 2m connection wiring.
-
Flood detector 1W-UNI 3m
Water flood sensor (point detection) with 1W-UNI interface.
-
Gas Leak Detector
Detector for indication of flammable gas presence.
-
Motion PIR Detector
PIR Motion Detector
-
Optical Smoke Detector FDR26
Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.
-
Power Detector
Detector of 110/230V voltage failure, which can be connected directly to a wall plug. Galvanic insulated relay output (NO) can be connected to any digital input (DI) of any HW grup product.
-
PowerEgg2
PowerEgg2 detects failures of a power supply and can be also controlled with a relay.
-
Sensor WLD Relay 1W-UNI
A universal WLD (Water Leak Detection) sensor, with one WLD sensing cable input and 2 kind of outputs (1W-UNI sensor and relay output).
-
Vibration detector SS14-v2
Vibration detector SS14
SS14 detects shocks and vibrations.
-
Vibration detector SS14-v2
SS14 v2 detects shocks and vibrations.
Converters
-
Converter 2xPt100 1W-UNI
Double converter to connect two Pt-100 and Pt-1000 probes to 1-Wire UNI (RJ11). One or two external temperature probes can be monitored over LAN Poseidon2) and GSM (Ares).
-
ED 310.DB HWG
3 phase 380V M-Bus energy meter for direct measuring (max load 63A). Pulses & M-Bus data output - 3x230V/400V, (5)63A.
-
ED 310.I.DB HWG
ED 310.DB HWG is a static three-phase, two-tariff electricity meter for indirect measurement with 5A inputs, with M-Bus and S0 interfaces – 3x230V/400V, 5A
-
Expander 4xDI 1W-UNI
Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).
-
Expander 4xDI 1W-UNI Industrial
Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc. to the 1-Wire UNI bus (RJ11).
-
M-Count 2C
2x S0 datalogger and converter to M-Bus (2x pulse input (S0) / M-Bus output)
-
Meter 1f PRO1-Mb 45A M-Bus
Single-phase electricity meter 45A with M-Bus
-
Meter 1f PRO2-Mb 100A M-Bus
Single-phase electricity meter 100A with M-Bus
-
Meter 3f PRO380-Mb 100A M-Bus
3 phase 380V M-Bus energy meter for direct measuring (max load 100A). Pulses & M-Bus data output - 3x230V/400V, 100A.
-
Meter 3f PRO380-Mb x/5A M-Bus
Three-phase electricity meter indirect measurement, MID approved. Pulses & M-Bus data output - 3x230V/400V, 100A.
-
PRO1-Mod 0,25-45A ModBus MID
Single-phase electricity meter 45A with ModBus
-
PRO2-Mod 0,25-100A ModBus MID
Single-phase electricity meter 100A with ModBus
-
PRO380-Mod 0,25-100A ModBus MID
3 phase 380V ModBus energy meter for direct measuring (max load 100A). Pulses & ModBus data output - 3x230V/400V, 100A.
-
Relay Output 1W-UNI
External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of up to 50V / 1A load.
-
Relay Output 1W-UNI Industrial
External Relay output 1W-UNI module allows to expand Ares 12 functionality by remote control of up to 4 relay outputs with a dry contact (NO/NC) capable of up to 50V / 1A load.