STE2 PLUS SMS-GW

STE2 PLUS SMS-GW is a bundle package of STE2 PLUS monitoring unit and LTE version of SMS gateway for SMS and Call alerting.

  • To STE2 PLUS can connect up to 15 external sensors to 2x RJ11 ports.
    LAN & WiFi monitoring device STE2 PLUS is a professional product with HTTPS custom certificates, SNMPv3, SNMP Traps and IPv6.
  • The SMS-GW3 LTE is a central gateway that allows to HWg devices or SensDesk portals to send text messages (SMS) and make voice calls alerts.

This bundle package with 2 devices is a cost effective way to build a remote monitoring installation with SMS / Call alerts included even without the Portal. SMS GW device can be used by other HWg devices as central point to transmit SMS & Calls even from other HWg devices.

Features: 
  • STE2 PLUS thermometer included (LAN / WiFi)
  • Temperature sensor (IP67 - 3m) included in the retail package
  • SMS-GW3 LTE gateway included with external antenna
  • 2x wall plug power adaptor (International = EU, UK, US)
  • SMS/Calls GW for all HWg devices (RME)
  • SMS/Calls GW for any SNMP based software (NAGIOS for example)
Applications and usage: 
  • Remote technical rooms monitoring
  • SNMP / Email alerting with GW for SMS / Calls included.
  • Remote monitoring of refrigerator or freezer (alert when refrigerator fails, logging of operating and storage conditions)
  • Single SMS gateway for the entire network (other HWg devices) with an easy-to-use web-based configuration

Horizontal menu

STE2 PLUS sensors

Up to 15 external temperature sensor values can be connected to STE2 PLUS. Sensors can be daisy-chained from RJ11 port. One physical sensor can measure several values (°C + %RH = 2 sensor values). The maximum limit is 15 sensor values in total.

Compatible Sensors & Detectors

 

 

 

 

SMS-GW3 LTE

SMS-GW3 LTE is LTE gateway for sending SMS messages from several HWg devices.

It's part of the bundle with STE2 PLUS because of the "Device-to-GW" mode.

Customers with HWg monitoring devices are using one SMS-GW for alerting. Several HWg devices (on the same LAN) can connect to a single SMS-GW to send alarm alerts (SMS/voice calls) to different phone numbers. No extra software is needed, and it works over the local network using Box-2-Box (Peer-to-Peer) communication.

 

 

HWg Video Flyer about SMS-GW3 LTE device

HWg Video Flyer about STE2 PLUS device

STE2 Video manuals

To give you a closer look at how STE2 device works, we have prepared a new series of video manuals. In these videos, we will explore the STE2 r2 device in more detail.

>> View the whole STE2 R2 video manual series

>> Watch the STE2 playlist on HWg YouTube channel

 

 

Recommended products

Temp-1Wire IP67 (1m, 3m, 10m)

Temperature sensor with IP67 protection for general use.

HTemp-1Wire-Box2

Wall mount temperature and humidity sensor.

SMS-GW3 LTE

SMS-GW3 LTE is a LAN gateway for sending alarm SMS from HW group devices.

Expander 4xDI 1W-UNI

Expansion module for connection of 4 dry contact inputs to Ares and Poseidon units. Connect another button, door contact, smoke detector etc.

Sensor CO2 1W-UNI

Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)

Sensor 230V AC 1W-UNI

The sensor is designed for measuring of AC voltage in the range 100 - 250V AC.

Temp-1Wire Pt100 Frost

Precise industrial temperature sensor -200 to +160 °C

HTemp-1Wire Rack 19

Combined temperature and humidity probe for IT environment.

Temp-1Wire Pt100

High precision temperature sensor -50 °C to +200 °C - ideal temperature sensor for storages, food processing, freezers, medical and laboratory environments,

HTemp-1-Wire Outdoor

Temperature and humidity sensor for outdoor use.

Flood detector 1W-UNI 3m

Water flood sensor (point detection) with 1W-UNI interface.

Gas Leak Detector

Detector for indication of flammable gas presence.

Optical Smoke Detector FDR26

Optical Smoke Detector FDR26 for smoke detection and fire alarm signalization.