HWg-Ares 10

Product canceled
New product Available

Ares 10 is a cost-effective GSM thermometer for remote monitoring and alerting over GSM for locations without LAN access. Connect up to 6 external sensors and 2 dry contact detectors.

Ares monitors the readings of connected sensors. When a value reaches the alarm threshold, the device sends an e-mail or a text message (SMS), or dials specified numbers. Use SensDesk Technology portal to view measured data in a complex dashboard.

Ares products are ready for remote mass deployment using FOTA (Firmware Over The Air).

  • 6x Sensor value (RJ11 sensors 1-Wire UNI)
  • 2x DI (Digital Input) with S0 pulse counters;
  • 5x E-mail; 5x "SMS+Ring"
  • Use the USB interface to configure the device from a PC with no need to install any additional software. Remote configuration also possible via the “AresConf” tab in the SensDesk portal.
  • Remote firmware upload (FOTA) capability makes Ares devices ideal for large-scale deployments.
  • Connected via GSM/GPRS. List of APN available worldwide
  • A sensor value out of a set safe range as well as a DI state change sends an alert by e-mail or "SMS+Ring".
  • Data can be sent in e-mail attachments or downloaded via USB.
  • The "Tset" start set includes a temperature sensor with a cable that can be extended to up to 60 m.
  • Data Logger for more than 250.000 recordss;
Applications and usage: 
  • Electricity distribution networks (transformer stations, lines)
  • Water  source monitoring, including technical equipment  status
  • Agricultural  premises (greenhouses, granaries,  etc.)
  • Road, highway, or railroad technology
  • Temperature and thermal expansion of  structures
  • Diesel generators – environment and status  monitoring

Horizontal menu

HWg-Ares: features for IoT projects


  •  Data transfer over the GSM / GPRS mobile network
  • Quick view to current data on SensDesk web portal
  • Mobile application, desktop apps
  • Sending data by e-mail, custom sw or third-party cloud  applications
  • LTE version in 3Q 2018

HWg-Ares units allow to connect to the Internet via a GSM/GPRS network. Data is transmitted via the HWg-Push protocol to the SensDesk public portal or HWg-PDMS software. Data can be emailed to PDMS, and the software download it from the POP3 mailbox or its secured POP3S variant.
The Sensesk IoT portal provides quick view to current values on the mobile phone as well. It can display graphs of measured values up to 3 months back. It also includes the ability to set alarm messages via e-mail or SMS (with own HWg-SMS-GW3 gateway) in a cloud-like web page.
IoT PDMS software allows to collect all measured data and convert it to Excel format. It can then perform its own analysis. Excel reports from PDMS can be used to document environmental values for control bodies, for example, in pharmacies and food industry.
The HWg-Ares is ideal for outdoor or mobile IoT applications because it has wide signal coverage thanks to GSM communications. Switching between BTS (base station - network cell) is up to 180 km / h automatic and without loss of communication.


Differences between Ares 10 vs. Ares 12

  Ares 10 Ares 12
1-Wire UNI sensors 14×
External outputs NO YES
Battery NO YES







Recommended products

Temp-1Wire-Flat 3m

A stainless steel temperature probe with a flat cable.


Wall mount temperature and humidity sensor.

Door contact MK4

Security Door contact MK4 with 2m connection wiring.

Sensor THPVoc 1W-UNI

Temperature, Humidity, atmospheric Pressure, TVoc sensor (-30 to 70 °C, 0 to 100% RH, 300 – 1 000 hPa, 0 – 60 000 ppb), indoor box with RJ11 (1-Wire UNI) int

Sensor CO2 1W-UNI

Combined Temperature (-0 to +50 °C), Relative Humidity (RH 0-95%) and CO2 (300 - 40000 ppm) sensor in one box. RJ11 interface (1-Wire UNI bus)

HTemp HomeBox

Combined temperature sensor -30 ° C to +70 ° C and humidity sensor 0-100% RH, for wall mounting RJ11 (1-Wire)

Temp HomeBox

Temperature sensor -30 ° C to +70 ° C for wall mounting RJ11 (1-Wire)